POLYMER MODIFIED BITUMEN
Published on: Mar 4, 2016
Transcripts - POLYMER MODIFIED BITUMEN
Polymer Modified Bitumen
NITESH KUMAR JHA(111139)
Department of Civil Engineering
NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL
What are plastic roads?
Need of study
Concept of plastic roads
Advantages of plastic roads
Disadvantages of plastic roads
Growth in industries and population together has resulted
in production of various types of waste materials.
The creation and disposal of non-decaying waste materials
such as Fly-ash, Steel Slag, Scrap Tyres, Plastics etc. have
been posing difficult problems.
Considerable work has been done in various countries for
the disposal of some of these waste products and
utilisation of some other products.
There is a long list of published literature dealing with
different aspects of these challenging problems.
What are waste plastic roads?
The roads constructed using waste plastic, popularly known
as Plastic Roads , are found to perform better compared
to those constructed with conventional bitumen.
1)The Indian Center for Plastic in the Environment (ICPE) has
been promoting the use of plastic waste to construct asphalt
2) A few trial roads have been paved successfully by combining
waste plastic with bitumen.
A Long lasting road from waste plastic for a
better and green world….
Need of study
1)Disposal of waste plastic is a major problem.
Waste Plastic dumped on roads
2)It is non-biodegradable.
3)It mainly consists of low-density polyethylene.
4)To find its utility in bituminous mixes for road construction.
5)Burning of these waste plastic bags causes environmental
6)Laboratory performance studies were conducted on
7)studies proved that waste plastic enhances the property of
8)Improvement in properties of bituminous mix provides the
solution for disposal in an useful way.
Aggregate of 20mm, 10 mm.
Stone Dust and Lime as Filler.
60/70,80/100 grade bitumen.
Waste plastic in the shredded form are used.
Construction of plastic roads
Plastics waste (bags ,cups , bottles ) made out of PE,PP
and PS cut into a size between 2.36mm and 4.75mm using
Shredding Shredded Plastics
The aggregate mix is heated to 165°c (as per the HRS
specification) and transferred to mixing chamber.
Amount of plastic to be added is @8% of bitumen.
Similarly the bitumen is to be heated up to a maximum of
160°c (HRS Specification) to have good binding property.
(Monitoring the temperature is very important).
Heating Of Aggregates
At the mixing chamber, the shredded plastics waste is to be
It get coated uniformly over the aggregate within 30 to 60
seconds, giving an oily look.
Addition of shredded Plastics Coated aggregates
The plastics waste coated aggregate is mixed with hot
bitumen and the resulted mix is used for road
The road laying temperature is between 110°c to 120°c. The
roller used is 8-ton capacity.
Adding of Bitumen
Mixing Laying and Compaction
There are two type of field trials-:
1. DRY PROCESS
The aggregate is heated to 170°C in the Mini hot Mix Plant .
The shredded plastic waste is added in equal proportion.
Immediately the hot Bitumen 60/70 or 80/100 grade
(160°C) is added.
The mixture is transferred to the road and the road is laid.
Waste plastics by direct mixing with hot bitumen at
Mechanical stirrer is needed.
Addition of stabilizers and proper cooling.
Since the wet process require a lot of investment and
Not commonly used.
ADVANTAGE OF USING MODIFIED BITUMEN:
Stronger road with increased Marshall Stability Value.
Better resistance towards rain water and water stagnation.
No stripping and no potholes.
Increase binding and better bonding of the mix.
Reduction in pores in aggregate and hence less rutting and
Generate jobs for rag pickers.
The strength of the road is increased by 100%.
For 1km X 3.75m road, 1 ton of plastic (10 lakh carry bags) is
used and 1 ton of bitumen is saved.
Value addition to the waste plastics (cost per kilogram
increases from Rs 4 to Rs12).
Reduce the cost to around Rs. 5000/Km. of single lane
The maintenance cost of road is almost nil.
Disposal of waste plastic will no longer be a problem
DISADVANTAGES OF PLASTIC ROAD
1. Cleaning process -:
Toxics present in the co-mingled plastic waste would
2. During the road laying process -:
In the presence of chlorine will definitely release noxious
3.After the road laying -:
It is opined that the first rain will trigger leaching. As the
plastics will merely form a sticky layer, (mechanical abrasion).
The components of the road, once it has been laid, are not inert.
Plastic will increase the melting point of the bitumen.
Help to improve the environment.
Plastic roads would be a boon for India’s hot and extremely
humid climate, leaving most of the roads with big
Waste plastics when mixed with binder is found to give
higher strength, higher resistance to water and better