Pressure vent installation 200515
Another successfully completed installation of our fire rated pressure vents, louvres & security grilles. All completed within programme on a high profile project.
Published on: Mar 4, 2016
Transcripts - Pressure vent installation 200515
To design, manufacture, install
& commission Pressure Relief
Vents within a new build data
suites & associated rooms.
4 off PV500, 3 off SC500, 3 off
5 off PV700, 2 off SC700, 2 off
1 off PV1000, 1 off SC1000, 1
The main issue on this project
was that some of the rooms
had to be cascade vented, the
programme was extremely
tight and the weather louvres
had to be colour matched.
Contact E email@example.com W www.airpressuresolutions.co.uk T 01732 652025
We were asked to design, supply, install and com-
mission a number of pressure vents, security
grilles and weather louvres for a new build/
refurbished datacentre and associated rooms.
The programme was extremely tight and there
had to be a lot of co-ordination with other trades
due to the time constraints.
As a global leader in pressure venting we have over 30 years experience in developing pressure venting & associated
products to many different markets globally. Our product line up consists of the following Pressure, Blast & Air Sta-
bilisation Vents, Fire Dampers, Window Actuators, Leak Detection, Facility Monitoring Equipment, Ventilation Prod-
ucts and Smoke Control Systems. If you want a further look at our products please look at our website or please call.
The installation was challenge due to the number of trades on site and the programme re-
quirements. All site precautions were taken as you would expect from a site of this nature.
Also a team of engineers was utilised who had worked in these types of environments and had
an exemplary record.
The weather louvres had to be colour matched to the
existing colour of the façade which is a service that
we are able to offer for our clients at a small addi-
tional charge. Within some of the units we also fitted
an internal security grille
700mm x 700mm Inert Pressure Vent used for Cascade
3 off 700mm x 700mm Inert External Weather Louvre
UK Manufactured & Tested with UK
held stock of our standard sizes
500mm x 500mm Inert Pressure Vent
The installers were pleased to use our PV700 vent as
we have widened the flanges to 100mm to help with
the installation as these vents weigh approximately
30 kg’s. The size of flanges help with moving the
product into position and also finding a suitable fixing
as they have additional holes.
In Partnership with one of our approved installers