To design, manufacture,
install & commission Pres-
sure Relief Vents within live
data suites.
System Components
of 1

Pressure vent installation 171214

This project involved installing custom sized pressure vents into live data suites. This client also want us to include the high specification security grilles which exceeded LPS 1175. The project was successfully completed on time and within budget.
Published on: Mar 4, 2016
Published in: Business      

Transcripts - Pressure vent installation 171214

  • 1. Project To design, manufacture, install & commission Pres- sure Relief Vents within live data suites. System Components 500mm x 700mm & 500mm x 1000mm Custom Made Inert Pressure Vent & Secu- rity Grilles Design Considerations The main issue on this pro- ject was that the end client had recently acquired some new buildings but there was no pressure venting for the gas suppression systems. Contact E W T 01732 652025 We were asked to design, supply, install and commission a number of custom sized Inert Pressure Vents for these high profile data suites. We supplied two sizes which were 500mm x 700mm & 500mm x 1000mm de- pending on the suite that was being protected. These were all custom made in short leadtimes and arrived at site during the required time- scales. As a global leader in pressure venting we have over 30 years experience in developing pressure venting & associated products to many different markets globally. Our product line up consists of the following Pressure, Blast & Air Sta- bilisation Vents, Fire Dampers, Window Actuators, Leak Detection, Facility Monitoring Equipment, Ventilation Prod- ucts and Smoke Control Systems. If you want a further look at our products please look at our website or please call. As part of the clients specification there was a requirement for security grilles which were manufactured in line with the Home Office standard LPS1175 but the grille that was eventual- ly supplied exceeded the requirements of this standard. The installation was challenge due to the data suites being live and the critical nature of the areas. All precautions were taken to minimise the risk from dust, vibration and noise within these areas. Also a team of engineers was utilised who had worked in these types of environ- ments and had an exemplary record. Another advantage from using these particular sizes of pressure vent meant that that due to their size there was no requirement for a con- crete lintel and a 6mm plate lintel could be used. Pressure Vent with Security Grille Pressure Vents UK Manufactured & Tested with UK held stock of our standard sizes

Related Documents