Poly Tanks vs Steel Tanks Strength and Durability Compared
Like chromium can be added to create stainless steel which provided protection from oxidisation and rusting, so too UV stabilisers can be added to a polymer mix prevents the plastic from becoming brittle and decomposing. Of course, all material has a finite life, however this is least of weaknesses in a UV-stabilised polymer tank.
Published on: Mar 4, 2016
Transcripts - Poly Tanks vs Steel Tanks Strength and Durability Compared
Poly Tanks vs Steel Tanks – Strength and Durability
In terms of durability, there is a belief circulated around that all poly water tanks will become brittle and break
down in the Sun. After all, polymer is a plastic and we have all seen how plastic objects decompose and
become powdery time. This is similar to saying all steel will corrode in the weather or upon contact water,
after all we have all seen how steel rusts and corrodes.
Like chromium can be added to create stainless steel which provided protection from oxidisation and rusting,
so too UV stabilisers can be added to a polymer mix prevents the plastic from becoming brittle and
decomposing. Of course, all material has a finite life, however this is least of weaknesses in a UV-stabilised
That said, some stainless steel tanks will not to withstand corrosion if in contact with high marine
environments (salty sea water) or with chlorine (found in pools). High industrial areas and welding can also
leave iron deposits that can cause irreversible pitting and even result in tiny holes. To deal with these issues, it
is important to wash stainless steel tanks with fresh water and spot clean them with a cloth if rust-like spots
Traditional galvanised steel tanks, the iron within these tanks are coated by zinc which eventually wears away.
The iron then react with oxygen in the air and begins to rust. Higher quality galvanised tanks have a thicker
zinc coating, and could even last as long as your more modern ZINCALUME® steel often used for roofing.
While stainless steel is quite durable, it is important to note that many external factors can negatively impact
upon the longevity of more modern steel technologies like ZINCALUME® and AQUAPLATE®.
AQUAPLATE® is BlueScope’s specially constructed steel for rainwater tanks with a .2mm polymer layer on at
least one side. It is what BlueScope recommend out of all their products for rainwater tanks. Unless you are
purchasing a rainwater tank built of their next generation ZINCALUME® steel (AM125), then you are better off
going for AQUAPLATE® which is ‘old’ ZINCALUME® steel (AZ150) hot-dipped in zinc with a poly lining.
With both these steels, it is important to understand that they cannot come into contact with moisture,
fertiliser, pesticides, lead, copper and other dissimilar metals. Runoff from copper flashings and pipes will lead
to corrosion. Warranties are void for these reasons, and if your tank is not kept clean from leaves and debris or
not washing it down.
Steel tanks however are otherwise very strong and will not bulge or warp since they are made from steel.
Being metal however, they are less impact resistant than a poly tank which easily withstand being struck with
hard objects like a hammer. Poly tanks will just bounce back into place. Steel tanks will obviously receive
dents and irreversible damage.
While stainless steel tanks are largely corrosion resistant, corrosion still often occurs at the joints, rivets or
screws. With all steel tanks, the weakness is normally with how they have been manufactured into the final
Leaders in Polyethylene Tanks
Call 1800 758 709
product. Steel tanks that are well stitched together could mean it lasts any leaks for decades, versus a poorer
one which might cause problems in just a couple of years.
As a side, an investigation by the Public and Environment Health Services in Tasmania found water in some
stainless steel tanks containing harmful levels of lead, because lead was used to solder the stainless steel
sheets together. So there is also the added risk of safety to your drinking water, that is, if your steel tank does
not have a food-grade inner poly lining.
With your poly water tank, if it has been properly designed and manufactured according to Australian
standards then it should not bulge, warp and stretch. Some features of a strong and quality poly tank include:
• moulded as one seamless piece (that is, without side seams)
• wall thickness 4.5mm or greater
• strong base corners with a radius of 25mm for a tank up to 1.8m in diameter, or a radius of 38mm for
tanks over 1.8m in diameter
• tapered tanks walls (thicker poly walls at the base of your tank where the most pressure will be)
• ribs which provide greater strength.
Requirements for building a strong poly tank are found in the Australian poly tank standard, AS/NZS 4766
Polyethylene storage tanks for water and chemicals. Note: Not all Australians poly water tanks comply with
this standard. Always confirm your tank is certified by asking the manufacturer who certified them and for
their certification number.
If you have found this article helpful and are looking for a water tank,
talk to our friendly staff today to discuss your needs and get a FREE quote:
Phone: 1800 758 709 Website: www.nationalpolyindustries.com.au
Web version (current):
Visit our Knowledge Base for more articles:
89 Childers Road
Bundaberg QLD 4670
1st Floor, 350 High Street
Maitland NSW 2320
20 Bridge Street
Pymble NSW 2073
CALL US 1800 758 709
You Can’t Buy Better Than The Best
National Poly Industries is a privately owned
Australian company manufacturing tanks for
over 20 years and polyethylene tanks for
over 15 years.
Disclaimer: The information in this document is general and provided solely on the basis that users will take responsibility for
verifying the accuracy, currency and completeness of all relevant representations, statements and information. No user should
act on the basis of any matter contained in this publication without considering and, if necessary, taking appropriate professional
advice upon his or her own particular circumstances.
While National Poly Industries tries to ensure that the content and information is accurate, adequate or complete, it does not
represent or warrant its accuracy, adequacy or completeness. National Poly Industries and any associates are not responsible for
any loss suffered as a result of or in relation to the use of this information. To the extent permitted by law, National Poly Industries
excludes any liability, including any liability for negligence, for any loss, including indirect or consequential damages arising from
or in relation to the use of this information.
‘Poly Tanks vs Steel Tanks – Strength and Durability Compared’ by National Poly Industries is licensed under a
Creative Commons Attribution-NoDerivs 3.0 Australia license.
You are free to copy and redistribute the material in any medium or format under the following conditions:
1. Attribution – You must give credit to National Poly Industries, provide a link to the Web version of this article or to
http://www.nationalpolyindustries.com.au/, provide a link to the license, and indicate if changes were made. You may do
so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. No Derivative Works – If you remix, transform, or build upon the material, you may not distribute the modified material.