Published on: Mar 3, 2016
Transcripts - NAGARAJU_RESUME (2)
H.No:12-2-26, Md Kasim basthi,
Bellampally(MD), Adilabad(DT), Phone No: +91 8143561327
Andhra Pradesh-504251. E-mail Id: email@example.com
To work in a firm with a professional work driven environment where I can utilize and apply my
knowledge, skills which would enable me as a fresh graduate to grow while fulfilling organizational
BASIC ACADEMIC CREDENTIALS
Qualification Board/University Year Percentage
B.V.Raju Institute of Technology
Diploma Govt Polytechnic,Warangal 2008-2011 79.71%
SSC ST Anthonys High school 2008 86.7%
MAJOR PROJECT DETAILS:
TITLE:DESIGN AND IMPLEMENTATION OF TUNNELING FOR IPV6
This project helps in establishing the connection and performing exchange of information between
IPv4(Internet Protocol Version 4) and IPv6(Internet Protocol Version 6) by using the process Tunneling.
Tunneling is nothing but a pipelining process.The reason for doing this project is,in the present world
IPv4 addresses are exhausted so we moved for IPv6.But there is problem with going for IPv6,if we go for
IPv6 we have to replace all the IPv4 addresses with IPv6 this is a tigid process.If we can establish a
communication process between IPv4 and IPv6 this problem can be solved.we created this
communication process in sofware GNS3 by using Tunneling Process.
TITLE:CAN MESSAGING SYSTEM FOR AUTOMOTIVES
“Can Messaging System for Automotives ( Car)” The main objective of this project is to develop
messaging system for an automotive using CAN open layer. The controller area network (CAN) is a
serial, asynchronous, multi-master communication protocol for connecting electronic control modules in
automotive and industrial applications. Controller Area Network (CAN) was initially created by German
automotive system supplier Robert Bosch in the mid-1980s for automotive applications as a method for
enabling robust serial communication. Since its inception, the CAN protocol has gained widespread
popularity in industrial automation and automotive/truck applications. Other markets where networked
solutions can bring attractive benefits like: medical equipment, test equipment and mobile machines are
also starting to utilize the benefits of CAN. In this project we are using numerous micro controller based
devices which are connected to stand alone CAN transceivers which are intern connected using CAN bus
for atomization of automotive electronics The CAN transceivers used in this project is MCP2510 from
Microchip Technologies Inc which will be connected to micro controller using serial programming
peripheral (SPI) bus. Software Required: Embedded C Cross Compiler, Flash Programming software,
Hyper Terminal for serial communication. Tools used : Keil3, Turbo C Programming Language :
Embedded C, ANSI C Micro Controller : LPC2129 ,Protocols used : RS232, CAN
MINI PROJECT DETAILS:
TITLE:DATA ACQUITION SYSTEM FOR PC
This Project is used to measure the temperature,humidity and amount of smoke evaluated in an Industry
and the whole system of measuring these parameers is called Data Acquisition Systems.A data
acquisition system is a device designed to measure and logs some parameters. The purpose of the data
acquisition system is generally the analysis of the logged data and the improvement of the object of
measurements.The data acquisition system is normally electronics based, and it is made of hardware and
software. The hardware part is made of sensors, cables and electronics components (among which
memory is where information is stored). The software part is made of the data acquisition logic and the
analysis software (and some other utilities that can be used to configure the logic or to move data from
data acquisition memory to a laptop or to a mainframe computer.
DIPLOMA PROJECT DETAILS:
TITLE:GSM AND GPS BASED ELECTRONIC EYE
This Project is used to monitor or safe guard the Home by using sensors and mobile phone.This project is
used to monitor the home if any uneven situations occur in home like opening of door, unnecessary
changes in house like gas leakage,etc.. The sensors used to monitor the changes.If any changes occurs it
intimates the owner by making an call or through an SMS.
Advance diploma in Embedded Systems-Certified by Indian Service Machines(ISM).
Language: Basics of C, C++.
Software :Device Drivers
CO-/EXTRA –CURRICULAR ACTIVITIE
Submitted a paper on “MOBILE COMMUNICATIONS” in the event “CONVERGENCE
2013”,National level Technical symposium conducted by “VNR Vignana Jyothi Institute Of
Engineering And Technology”
• Active participant as a member of welcome speech on our School Annual day.
Ability to rapidly build relationship and set up trust.
Confident and Determined
Ability to cope up with different situations.
Father’s Name :- M Satyanarayana.
Mother’s Name :- M Ramadevi.
Permanent Address :- 12-2-26,MD kasim basti,Bellampally,Adilabad-504251
Date of Birth :- 18thJanurary 1992
Language Known :- English, Hindi and Telugu
Marital Status :- Single
Nationality/Religion :- Indian.
Interest & Hobbies :- Internet browsing ,Watching cricket
I do hereby declare that the above information is true to the best of my knowledge.
Place: Nagaraju M