Nabil Sharif resume _1_
Published on: Mar 3, 2016
Transcripts - Nabil Sharif resume _1_
A. NABIL SHARIF
To work in an organisation where I can grow with it by enabling me to apply my
technical and creative skills to my fullest extent and allowing me to be exposed to
the cutting edge technology in the industry.
Complete knowledge on inspection and refurbishment of Gas Turbines, Steam
Turbines, Compressors & Pumps at both site & shop.
Hands on experience in Condition Monitoring, Reliability, PM, trouble shooting
& Root cause / failure analysis.
Hands on experience on Dynamic, static, Component & Field/Trim Balancing.
Expert in Inspection & refurbishment of Gas turbine components (rotors –
Class I, II & III inspection and Hot gas path components)
Hands on experience on NDT Techniques (PT& FPI, UT, MT).
Hands on experience on use of measuring & testing Instruments.
Preparation of inspection reports and technical reports.
Recommendation / Preparation of repair work scopes.
Good knowledge of drawing reading & drafting.
Working exposure to International standards & codes (ASNT, API, AWS, ISO.)
Well versed with computer knowledge (Word, Excel, Power Point, Visio).
PROFESSIONAL EXPERIENCE DETAILS:
COMPANY : ISCOSA - A SIEMENS COMPANY
DESIGNATION : INSPECTION ENGINEER (ROTATING EQUIPMENTS)
DURATION : 2010 - TILL DATE
I have complete work experience on the following items/components &
Inspection, Overhauling / Refurbishment and testing of Gas Turbine Rotors of
Westinghouse / Siemens (W251, W501AA, W501D W501D4, W501D5, W501D5A,
MHI (501G & 701), FIAT (TG16 & TG20), GE (Frame 5, 6 & 7), ABB.
Inspection, Refurbishment / Overhauling of Steam Turbine, Pumps &
Compressor Rotors of different models, Capacities & makes (Siemens, Demag,
MHI, GE, Westinghouse, Elliot, Hitachi, Toshiba, Fuji, Alstom etc).
Refurbishment of Fans and Blowers, Gear boxes, Fuel Nozzles, Torque
Converters, Governors, Flow Dividers, Compressor Diaphragms, Compressor
Casings, Steam Turbine & Pump Casings, Boiler & Steam Turbine valves and
Static & Dynamic Balancing of Rotating Equipments per OEM or International
Rebabbitting of Sleeve, Radial, Tilting Pad & Thrust Pad bearings of Turbine &
The Job involves the following technical aspects at ISCOSA Shop & site in
coordination with Foremen, Quality Assurance & Plant Manager.
To perform root cause analysis / Fault Analysis, and to provide
disposition/solution on Technical Issues/Problems of the jobs in coordination
with shop supervisor.
To recommend repairs, prepare repair work scope & part lists on the jobs
based on the inspections.
To Supervise and review Mechanical & Electrical run outs, Alignment
Services, Dynamic, static & Trim / Field balancing of rotating equipments.
To witness & verify the refurbishment work scope on the job as per OEM or
Siemens procedures / standards.
To Supervise the Non Destructive Tests (PT, FPI, MT, UT) on the components
as per ASNT, Siemens standards & to recommend repairs based on the
review of these results.
Responsible for carrying out (facilitating) the customer audits & inspections
on the jobs, discussions on solving technical issues with maintenance &
reliability teams/ departments of the customers.
To identify non conforming processes / products at all stages of service and
to ensure the product / job meets the customer requirements. To ensure the
non conformances are closed within the required time frame.
To liaise with SIEMENS or OEM Engineering on technical Issues & ISCOSA
shop Drawing/Document and Data control.
Follow up of Corrective and Preventive Actions (CAPAs) for ISO/Customer
/Safety Audits in the shop & management review meetings.
KEY CLIENTS HANDLED
Qurayyah Independent power plant, Qurrayah
Ibn al-baytar(A Sabic affiliate), Jubail
Suhaiba independent water & Power plant, Suhaiba
Saudi Electric company, Hail
Saudi Electric company, Asir
Saudi Electric company, PP9 (Riyadh)
Ministry of defense and aviation, Qasem
Saudi Electric company, Jizan
Saudi Electric company, Tabuk
Saline water Conversion Corporation,Yanbu
Saline water Conversion Corporation, Azizya
Jubail Electric Company, Jubail
SABIC (Sharq), Jubail
Tasnee Petrochemicals, Jubail
Berri Gas plant, Jubail
Ras tanura refinery, Ras Tanura
Saudi Aramco, Abqaiq
Riyadh refinery, Riyadh
Saudi Aramco, Qatif Junction
Saudi Aramco, Safaniyah
Saudi Aramco, Shaybah
Arabian cement company, Rabigh
COURSE : BACHELOR OF ENGINEERING (B.E)
DISCIPLINE : MECHANICAL ENGINEER.
UNIVERSITY : ANNA UNIVERSITY, CHENNAI, INDIA
GRADE : FIRST CLASS
CERTIFICATION : AMERICAN WELDING SOCIETY (AWS)
CERTIFIED WELDING INSPECTOR (CWI)
Name : A. Nabil Sharif
Gender : Male
Date of Birth : 18-05-1986
Marital Status : Married
Father Name : B. Anvar Sharif
Nationality : Indian
Driving License : Holding Saudi Driving License
I hereby declare that all the information above is true to best of my knowledge,
belief and information.
Place: (NABIL SHARIF.A)