Nanotechnology-Textile and nanoparticles are good friends
Presented in the nanotechnology class, Dept. of Chemistry, Kyung Hee, Seoul 2011.
Published on: Mar 3, 2016
Transcripts - Nanotechnology-Textile and nanoparticles are good friends
(1) Liangbing Hu; Mauro Pasta; Fabio La Mantia; LiFeng Cui; Sangmoo Jeong; Heather Dawn Deshazer; Jang Wook Choi; Seung Min Han; Yi Cui; Nano Lett. 2010, 10, 708-714. (2) David T. Schoen; Alia P. Schoen; Liangbing Hu; Han Sun Kim; Sarah C. Heilshorn; Yi Cui; Nano Lett. 2010, 10, 3628-3632. Jelliarko Palgunadi Stretchable, Porous, and Conductive Energy Textiles 1 High Speed Water Sterilization Using One-Dimensional Nanostructures 2
Stretchable, Porous, and Conductive Energy Textiles Motivation: Creating lightweight, flexible, and wearable electronic devices. Method: Incorporating single-walled carbon nanotubes (SWCNTs) and capacitance-enhancer nanomaterials into common textiles to produce highly conductive textiles. Revolution
(b) Conductive textiles are fabricated by dipping textile into an aqueous SWNT ink followed by drying in oven at 120 °C for 10 min. (c) A thin, 10 cm × 10 cm textile conductor based on a fabric sheet with 100% cotton and R s of 4 Ω/sq. (d) SEM image of coated cotton reveals the macroporous structure of the cotton sheet coated with SWNTs on the cotton fiber surface. (e) SEM image of fabric sheet coated with SWNTs on the fabric fiber surface. (f) High-magnification SEM image shows the conformal coating of SWNT covering and bridging between the fabric fibers. (g) TEM image of SWNTs on cotton fibers. (a) Schematic of SWNTs wrapping around cellulose fibers to form a 3D porous structure. Porous textile conductor fabrication Ink: Single-walled carbon nanotubes dispersed in water containing sodium dodecylbenzenesulfonate (surfactant) Cotton
(c) The SWNT-coated textiles show unusual stretching properties. The film sheet resistance decreases as the SWNT/fabric is stretched up to 240% of its initial length, after which the resistance starts to increase. (d) SWNT/cotton is resistant to water washing, thermal treatment at 200 C for 6 h, 4 M HNO 3 acid, and 2 M KOH. (b) Excellent mechanical properties of conductive textile, that is, strong adhesion between SWNTs and textile (passing the scotch tape test), foldable, and stretchable. (a) Sheet resistance of fabric and cotton sheet after SWNT coating, which shows the same values on both faces for either fabric or cotton. The sheet resistances decrease by a factor of approximately 3 after HNO 3 treatment. Properties of textile conductors
Such strong binding of SWNT-fibers may be due to the following reasons: (1) Large van der Waals forces and hydrogen bonding exist between SWNTs and the textile fibers. (2) The flexibility of SWNTs allow them to be conformally adhered to the surface of cotton fibers which maximize the surface contact area between SWNTs and textile fibers.
(g) The schematic drawing of the stretchable SCs with SWNT/fabric as electrodes and with stretchable fabric as the separator (top). A SC under 120% strain (bottom). (h) The specific capacity for a strechable SC before and after stretching to 120% strain for 100 cycles. The current density is 1 mA/cm 2 . Organic SC with porous textile conductor. (a) SC structure with porous textile conductors as electrodes and current collectors. The porous structure facilitates the accessibility of electrolyte. (c) Areal capacitance increases with areal mass loading of SWNTs. Comparison with previous studies shows that our porous conductors allow the highest mass loading and highest areal capacitance. The current used is 200 μA/cm2.
(f) Charge−discharge of aqueous SC with SWNT/cotton electrodes and 2 M Li2SO4 as the electrolyte with current of 20 μA/cm2. The areal capacitance increases by 24-fold after MnO2 deposition. (g) Specific capacitance of SWNT/cotton with and without MnO2 for different discharge current densities. (h) Cycling stability of a SC with SWNT−MnO2 nanoparticles and porous textile conductor. Loading pseudocapacitor or battery materials in porous conductor. (a) Schematic drawing of electrodeposition of MnO 2 onto the SWNT coated textile fibers. Due to the porous structure, the MnO 2 particles are coated on all the textile fibers including those in the interior of the textile. (b) A photo of MnO 2 -coated SWNT/Cotton. (c) SEM of a top view of conductive textile after MnO 2 coating. (d) SEM of cotton fibers inside the textile after peeling the fiber layers apart, which shows that the MnO 2 nanoparticles coated the fibers in the interior of the textile, not just the surface layers. (e) High-magnification SEM image showing the flower structure of MnO 2 particles on SWNTs.
High Speed Water Sterilization Using One-Dimensional Nanostructures Motivation: Effective removal of bacteria and other microorganism from drinking water. Challenge: Membrane biofouling and clogging are ubiquitous (commonly present) problems in industrial or daily water purification practices. Method: High speed electrical sterilization of water using silver nanowires, carbon nanotubes, and cotton composite materials
Design of the device Silver nanomaterials are known to be effective for killing bacteria by damaging the protein and/or cell membrane (slow oxidation of Ag to Ag + ). CNT is known as a good electrical conductor and is useful as a porous electrode. Electric fields exceeding 10 5 V/cm are also known to breakdown cell membrane (electroporation). Cotton fibers are cheap, robust, micrometer-sized pores preventing from clogging Silver nanowires provides network for efficient electron transfer.
Schematic of active membrane device proposed. (B) Treatment of cotton with carbon nanotubes (CNTs). (C) Treatment of device with silver nanowires (AgNWs). (D) Integration of treated cotton into funnel. (E) SEM image showing large scale structure of cotton fibers. (F) SEM image showing AgNWs. (G) SEM image showing CNTs on cotton fibers. Experiments
Inactivation efficiency at five biases for AgNW/CNT cotton as well as CNT-only cotton. Schematic, fabrication, and structure of cotton, AgNW/CNT device for E. coli removal. Process & Performance
(B) Agar plate inoculated with bacteria solution incubated overnight with standard ashless filter paper; the light color is from a high density of cell colonies, the gray areas are agar without colonies. (C) Agar plate inoculated with bacteria solution incubated overnight with filter paper treated with AgNWs; no colonies are visible. (E) Kirby−Bauer (KB) antibiotic strength measurement for AgNW/CNT cotton showing a small 2 mm inhibition zone. The contrast in this image is reversed; the cell colonies are darker and the agar without colonies is lighter. AgNW antibacterial and antifouling testing. (A) Optical density measurements of solutions incubated with various treated and untreated substrates after inoculation with E. coli and overnight incubation. 10 6 cells/mL is the detection limit of the system.
<ul><li>Conclusions </li></ul><ul><li>Textile, i.e. cotton is a versatile support material for CNT and metal nanomaterials. </li></ul><ul><li>Shapeable, robust, and high density supercapacitor can be assembled from SWCNT incorporated onto cotton fibers by simple deep-coating process. </li></ul><ul><li>Effective, biofouling-, and clogging–free membrane for microorganisms inactivation in water can be fabricated from silver-nanowire/CNT immobilized onto textile fibers. </li></ul>